Category: Main > Transceivers > HF

Three in One Deal - Read On....  - $950 Listing ID: 9410

Classified Info

Listing Began: Jul 9 12:16
Number of Times Viewed: 1256


  • DSCF1343.JPG
  • DSCF1339.JPG
  • DSCF1340.JPG
  • DSCF1341.JPG
  • DSCF1337.JPG
  • DSCF1342.JPG


Seller's Comments and Description:

Three in One Deal - Read on - Will Not Separate

Icom 751 HF Amateur Transceiver

The Icom IC-751 is an advanced transceiver covering 160 to 10 meters. It features a high performance 100 kHz to 30 MHz general coverage receiver built in. Output is 10 to 100 watts SSB/CW/RTTY modes (10 to 40 watts AM). The IC-751 has sophisticated capabilities such as:  dual digital VFOs, all-mode squelch, Notch, Passband Tuning, RIT/XIT, pre-amp and attenuator. You also get 32 memories. The two color fluorescent digital display is easy to read. There is a multi-function meter. Serious CW operators will appreciate the full and semi break-in capability. The IC-751 has a high quality FL-44A 500 Hz SSB filter. The rear panel has an SO-239 antenna jack plus a receive only RCA phono jack. This radio requires 13.8 VDC at 20 Amps. 12 x 4.5 x 14 inches (306x115x349 mm)

All Mode    Analog S/RF Meter    160 - 10 Meters    All Mode Squelch    100 Hz Display    CW break-in     PBT    32 Memories    Dial Lock    RIT/XIT    Noise Blanker    Notch 

Icom IC-At100 Automatic Antenna Tuner

The Icom AT-100 is an automatic external antenna tuner for 80 through 10 meters. Specific frequency range is: 3.5-4, 7-7.3, 10-10.5, 14-14.5, 18-18.5, 21-21.5 and 28-30 MHz. It provides autoband switching with several Icom transceivers including the IC-751. Power capacity is 100 watts continuous, 200 watts PEP. Minimum drive power is 8 watts. The top panel access cover opens for adjustments for the Auto/Tune Preset switches, Preset timers and Preset Indicators. The AT-100 features one input SO-239 jack and four output SO-239 coaxial antenna jacks on the rear panel. Tune-up time is typically 4 to 7 seconds. The power requirement is 13.8 VDC or 240 VAC which is selectable from the rear panel. (241x111x300mm 5 kg). 

Kantronics Kam Plus Data Controller

The Kantronics KAM Plus is a dual port, HF/VHF multi-mode terminal node controllers used for sending and receiving data by radio. The KAM Plus supports G-TOR, Pactor, AMTOR ARQ, FEC, SELFEC, Packet, RTTY, ASCII, CW. It features PBBS with more than 100k of mailbox space and remote access. 

KAM Plus was designed to fill many different roles, but the world of digital operations is constantly changing.  Kantronics engineers have designed KAM Plus to accept firmware and memory upgrades, so that your KAM Plus is ready for future uses that may develop. The Kantronics KAM Plus is a versatile multi-mode communicator engineered for years of dependable performance. Kantronics has been a pioneer in digital communications, taking care to listen to the suggestions of digital operators, like you.

All items in good working order.

Includes all manuals, circuits, cables, Icom Desk Mic etc.  Price just $950.00 for the lot.

Price is FIRM. Will NOT Separate. Local pickup only from Bellbowrie which is 18kls west of Brisbane CBD. Ph: 0412671158.

Lee, VK4CXX, the original not the phoney / fake one. You will need to show your amateur license at pickup.

Public Questions / Answers

No questions have been posted about this listing.


<< Previous