Category: Main > Commercial - Dealer Only > Rotators

CREATE RC5A-3 Rotator & Preset controller  - $1,600 Listing ID: 28798



Classified Info

Listing Began: Feb 24 9:52
Number of Times Viewed: 261
  • 2021-02-030.jpg
  • 2021-02-031.jpg
  • 2021-02-032.jpg
  • 2021-02-033.jpg
  • 2021-02-034.jpg
  • 2021-02-035.jpg
  • 2021-02-036.jpg
  • 2021-02-037.jpg
  • 2021-02-038.jpg
  • 2021-02-039.jpg
  • 2021-02-041.jpg
  • 2021-02-042.jpg
  • 2021-02-044.jpg
  • 2021-02-045.jpg
  • 2021-02-046.jpg
  • 2021-02-048.jpg
  • 2021-02-050.jpg
  • 2021-02-052.jpg
  • 2021-02-053.jpg
  • 2021-02-055.jpg

Description

Seller's Comments and Description:

Up for sale is this fully refurbished & updated rotator & controller.
Includes top mast clamp & Gal H/W + plug & fork terminals for control cable, revised manual. 

Wind Area .............. 2.5 m sq.

Rotation Torque ..... 16.0 kg/m

Brake Torque ...........200 kg/m

Mast Size .................48 ~ 63mm

Brake System...........Worm Drive a natural brake system

Rotation Time ......... 75 ~ 110 seconds 360 degrees

Rotation Angle.........380 degrees.

Rotator Voltage ..... .28vAC.

Rotator Weight.........7.0Kg

 

The -3 Controller :- Has Dial Speed & Preset Control With Manual Direction Switch & Full Circle Compass Display With World Map Overlay.

Completely stripped down & updated with @ least 90% NEW parts.

New Parts installed:- Top & bottom case, Front panel etc, 7 way output terminal barrier, PCB AR-8J & TRIAC BCR8PM12,  Display drive gearing, Both POT's for Speed & Preset Control, 5K Ohm POT for display assembly, Transformers, Limit LED, Safety power lead etc.

Completely re-wired the whole controller. . 

Has be fully checked & aligned with the RC5A rotator below.

The RC5A Rotator :- Has 1/60 worm drive into two stage reduction gearing, all driven by a high torque 28v AC motor.

Completely stripped down & cleaned.

Has been refurbished & updated with @ least 90% NEW parts.

NEW Parts list:- MC621 mast clamps, Output flange, 28v AC motor + mounting bracket, Motor start CAP, Coupling assembly, Shafts for Worm Gear & Worm Wheel, Drive Gear & shaft, Final gear & shaft, Limit Switch assembly, POT gear, 5K POT & mounting bracket, Weather Seal & Screw cover cap, Both plug & socket for control cable, Fully re-wired. 

The housings were glass bead blasted etched primed then paint in Silver (aluminium) with a few coat of clear.

The original heavy 4 bolt version mast clamps that I refurbished @ the same time, were sold & I replaced them with a new current version 6 bolt set, which are a different colour.

The Worm Gear/Worm Wheel chamber was upgraded & sealed better for the new Bel-Ray 00 white fluid grease I use the chamber.

The Main & Drive gears were re-installed into the refurbished housings with new grease through out. 

Aligned & calibrated to the -3 controller.

Includes:- Top mast clamp & mounting hardware + plug & terminals for control cable         

230 VAC. 24 month warranty.

This Unit is available For Exchange. See details on my web site.
Contact Peter of Duoro Services on 0427 043 054 (NO SMS) or via the email services supplied by VK Classifieds. 


Details

Manufacturer CREATE Creative Design Corp
Model RC5A-3
Year of Manufacture 2021
Condition of Item Excellent
Accessories Included Top Mast clamp assembly, Plug & terminals for control cable, manual
Postage / Freight Buyer Pays





Advertisement

<< Previous Next >>