Category: Main > Commercial - Dealer Only > Rotators

EMOTATOR 103LBX Rotator Set Refurbished & Upgraded  - $350 Listing ID: 19674

Classified Info

Listing Began: Jun 24 13:47
Number of Times Viewed: 6
  • 18-02-001.jpg
  • 12-02-065.JPG
  • 12-02-066.JPG
  • 24-06-005.jpg
  • 18-02-005.jpg
  • 18-02-007.jpg
  • 18-02-008.jpg
  • 18-02-010.jpg
  • 18-02-011.jpg
  • 18-02-009.jpg
  • 01-08-022a.jpg
  • 01-08-024a.jpg
  • 01-08-028a.jpg
  • 01-08-032a.jpg
  • 09-02-007a.jpg
  • 12-02-055.JPG
  • 24-06-001.jpg
  • 24-06-002.jpg
  • 24-06-003.jpg
  • 24-06-004.jpg


  • $65


Seller's Comments and Description:

Rotator With Standard Panel Meter Controller, Refurbished & Upgraded ETC.

Includes top mast clamp, plug for control cable, IEC power lead plus revisied manual.

Wind Area......................0.5m Sq
Rotation Torque...............4.5 kg/m
Brake Torque...................15 kg/m
Mast size.........................32 ~ 61mm Dia.
Rotation Time...................52 seconds 360 degrees
Rotator Voltage.................24v AC
Controller voltage..............240v AC

This rotator set is suited for small HF yagis etc & VHF / UHF arrays etc.

The LBX Controller:- Panel meter display with momentary & lift to lock direction switch.
Disasembled, cleaned & prep chassis for upgrades & new parts.
The back panel:- Installed a new 8 pin Cinch socket & laser cut S/S cover/mounting plate, New fused IEC socket & earth bolt.
On the inside:- Upgraded the display illumination with a 3 LED module & there power supply. Moved the motor start CAP to the rotator. Replaced the direction display panel meter (that didn't work) with one from a Emotator CXX controller, replaced the damaged original PCB with an upgraded version form a Kenpro KR-400, Replaced original transformers with two new 240v versions.
Re-assembled, fully tested & aligned with the rotator.
The 103 (24v AC) Rotator:- Has a rubber pad lift disc brake system mounted on top of the motor.
Disassembled to the last nut, bolt & screw. Cleaned & checked all parts for damage.
Replaced the original faulty 100v AC motor with a 24v AC version plus motor start CAP, Replaced limit switches, replaced the 600 ohm POT with a new 500 ohm version to suit the LBX controllers replacement PCB, .
All housings & mast clamps/brackets have been cleaned then Glass Bead Blasted by IMPACT GLASS BEAD followed by painting in silver epoxy enamel paint followed by a few coats of clear.
The stainless steel 'U' bolt & hardware were cleaned in a special solution.
Replaced the original control cable terminal block with one from a 105TSX, but still uses the standard terminal cover which is new.
The gears were aligned & shimmed in there chassis, then re-assembled into the refurbished housings with new bearings & new grease through out.
Re-aligned & calibrated with the controller.
Supplied with upper mast clamp, mounting & clamping hardware etc. 

240v AC, 24 month warranty.
This rotator Set is available for exchange, view details on my web site.
Contact Peter of DUORO SERVICES on 0427 043 054


Manufacturer Emotator
Model 103LBX
Condition of Item Excellent
Accessories Included Top mast clamp & hardware, Plugs for control cable, IEC power lead + revised manual
Postage / Freight Pickup Available


<< Previous Next >>